KraussMaffei Extrusion has developed PVC InlineMixing, a continuous single-stage process for producing PVC roofing membranes. It replaces the conventional two-stage route in which PVC powder, plasticizers, additives and fillers are batch-mixed into a dryblend, cooled, stored and then plasticized in a twin-screw extruder.
In the new route, all solid and liquid components are fed directly into the extruder through gravimetric dosing systems in the required proportions. The company says this eliminates the separate heating-cooling-mixing combination and means the material is heated only once.
Cost and footprint
KraussMaffei reports that energy consumption and energy costs can fall by up to 75 percent, depending on formulation, system parameters and location. It also cites lower capital expenditure because no separate mixer is required, as well as reduced space needs, lower labor requirements and lower maintenance costs from eliminating wear parts for the heating-cooling mixer.
The company says the combination of lower capital and operating costs improves overall cost-effectiveness and supports a quick return on investment. The continuous design also changes how producers handle formulation changes: adjustments and color changes can be made during operation through the integrated control system, without preparing and storing separate dryblend batches.
Christopher Bartel, head of sales for Flat & Foam at KraussMaffei Extrusion, says the process offers membrane manufacturers lower production costs, greater flexibility and more efficient manufacturing. He says they can respond more quickly to new requirements and adjust formulations during production while reducing energy and capital expenditure.
Validation and industrial use
The process was developed at the KraussMaffei Extrusion Technology Center in Laatzen and validated with industrial roofing membrane formulations. The trials used a co-rotating twin-screw extruder from the ZE 65 BluePower series, equipped with loss-in-weight feeders for all solid components and multiple liquid feeders for free-flowing ingredients.
The ZE BluePower series has a Da/Di ratio of 1.65. According to the company, the combination of high torque and large free volume provides a wide process window for different formulations. Tests confirmed high gelation levels and product quality, and the mechanical properties and weldability of the membranes met industrial requirements across several formulations.
PVC InlineMixing is already in use on an industrial production line for PVC roofing membranes. The reference plant achieves a total throughput of 1,800 kg/h with two extruders and two calenders, processing PVC, additives, fillers and edge trimmings continuously into finished membranes.
KraussMaffei says the reference installation shows the process can combine high product quality with a leaner production route, processing PVC, additives, fillers and edge trimmings continuously into finished membranes.
