SPRIND invests in Cylib as battery recycler scales lithium recovery

The German disruption agency has taken an undisclosed stake in the Aachen startup, which is building industrial capacity for its lithium-first recycling process.

Germany’s Federal Agency for Disruptive Innovation, SPRIND, is investing an undisclosed amount in Aachen-based battery recycling specialist Cylib and becoming a shareholder. The startup, founded in 2022, is preparing to commercialise a recycling process that it says can recover more than 90% of lithium, graphite, nickel, cobalt and manganese from spent batteries.

The investment is intended to help Cylib further develop its technology and scale it to industrial maturity. The partners did not disclose the amount. Cylib argues that the case for recycling is reinforced by Europe’s limited domestic access to critical battery raw materials and by the growing number of end-of-life electric-vehicle batteries.

A lithium-first process

Cylib’s approach grew out of research at RWTH Aachen. Earlier recycling methods often concentrated on nickel and cobalt, with lithium recovered only at the end of the chain or lost in slag. Cylib’s water-based OLiC process, short for Optimised Lithium and Graphite Recovery, instead recovers lithium in the first steps from black mass, the material produced from end-of-life batteries before hydrometallurgical refining.

The company reports recovery rates above 90% for lithium, graphite, nickel, cobalt and manganese. That distinguishes the process from approaches in which lithium is treated as a late-stage by-product, Cylib says. The water-based route is intended to keep critical materials in a closed loop, returning them from spent batteries to new value creation.

Dr. Lilian Schwich, co-CEO and co-founder, said the technology began in research and has been developed to the threshold of industrialisation. She said SPRIND understands the importance of technological innovation for critical value chains and what is needed to bring it to market.

Olav Carlsen, innovation manager at SPRIND, said breakthrough innovations do not only occur in laboratories but also where a technology makes a new market possible. According to Carlsen, Cylib has the technological foundation to create a large-scale industrial market for battery materials that remain in circulation in Europe, strengthening Germany’s and Europe’s sovereignty over critical raw materials.

Pilot and industrial build-out

The practical viability of Cylib’s process has been tested in a pilot project with Porsche and other partners. Porsche announced in September that cathode active material made entirely from recycled raw materials, sourced from its own high-voltage batteries, had been produced for the first time. Cells made from that material are now undergoing testing.

Cylib has been accepting end-of-life EV batteries at its first industrial site in Wernberg-Köblitz, in the Upper Palatinate, since September 2026, and processing them into black mass. The facility is being ramped up gradually and is designed for a capacity of up to 10,000 tonnes per year. In parallel, the company is building a large-scale hydrometallurgical plant in Dormagen, North Rhine-Westphalia, where the raw materials will be recovered.

The Dormagen project is classified as a “Strategic Project” under the EU’s Critical Raw Materials Act. Together, the two sites cover successive stages: black-mass production in Wernberg-Köblitz and hydrometallurgical recovery in Dormagen. The SPRIND investment adds public backing as the startup moves from pilot-scale validation toward industrial operation.

KB

Kwesi Boateng

Kwesi Boateng writes about city and intercity buses, heavy and light commercial trucks, and the trailer combinations that connect them. His coverage works from measured payload, gross vehicle weight rating, axle load, seat count, and duty-cycle fuel or energy use, always naming the route profile, market, and test conditions behind each figure. He supports fleet operations directors, transit procurement officers, and commercial vehicle buyers who must match vehicle capacity, accessibility layout, and maintenance intervals to real service schedules.