Chevrolet made the C8 Corvette a mid-engine car and, with that change, made it automatic-only. The dual-clutch transmission was the sole offering, a decision the review links to the cost of engineering two transaxles for a mid-engine sports car and to the pursuit of comparison-test performance. A manual would have served a small enthusiast minority.
Tremec, whose six-speed manual has been used in GM performance models including the Blackwing cars and the Camaro, has built a C8 development car with a manual transaxle. The vehicle is real, and it was recently made available for a track drive at Motorsports Gateway, a private circuit outside Howell, Michigan. The car itself is a one-off Peitz Performance C8 race build.
A race car, not a showroom conversion
The test car is a competition-style build with a full cage and harness and essentially no interior finish. The shifter emerges from the area normally occupied by the storage cubby and automatic gear selector. The driving position is fixed, and the reviewer, who is 5-foot-7, could not comfortably reach the floor with either foot or brace against it in corners, making heel-and-toe downshifts awkward. That limits how hard the car could be pushed, especially on a green track on a November afternoon in Michigan.
Mechanically, the conversion is more straightforward than the cabin suggests. Peitz had to cut the tunnel to install clutch-pedal hardware, but the manual transaxle occupies the same space as the stock dual-clutch unit and needs no exotic mating parts. The C8’s pedal box also has room for a clutch pedal; even with three pedals, the footwell is said to feel roomier than a previous-generation Camaro’s.
The trade-off is in the shift feel
Because the C8 is mid-engine, the shifter is remotely mounted and linked to the transaxle by cables. That makes the mechanism less precise and less crisp than the front-engine TR-6060 six-speed, and it takes away some notchiness. The result may be smoother and more appealing to some drivers, while others may miss the more mechanical feel of the front-engine installation. Moving the engine forward would effectively bring back a C7 layout; moving the shifter rearward would put the driver near the C8’s engine bay.
Cost remains the obstacle
The gearbox is not cheap. Tremec’s unit alone is priced at about $75,000, and the total cost of building a manual C8 with it is said to rival a showroom-spec Z06. Tremec expects the price to fall as volume rises. It also says OEMs are interested, not necessarily or exclusively General Motors, and that other automakers want a high-torque manual transaxle. No customers were named.
The drive demonstrates that a manual C8 is technically feasible and that the packaging work is not prohibitive. It does not show that Chevrolet will offer one. The more immediate conclusion is that the engineering exists, but the business case still depends on volume, price and a manufacturer willing to build a mid-engine manual around a transmission that currently costs as much as a small sports car.
